Oscillation and breakup of a bubble under forced vibration

Coupled shape oscillations and translational motion of an incompressible gas bubble in a vibrating liquid container is studied numerically. The bubble oscillation characteristics are mapped based on the bubble Bond number (Bo) and the ratio of the vibration amplitude of the container to the bubble diameter (A/D). At small Bo and A/D, the bubble oscillation is found to be linear with small amplitudes, and at large Bo and A/D, it is nonlinear and chaotic. This chaotic bubble oscillation is similar to those observed in two coupled nonlinear systems, here being the gas inside the bubble and its surrounding liquid. Further increases in the forcing, results in the bubble breakup due to large liquid inertia.     

Experimental study on wake flow structures of screen cylinders using PIV

Experiments were conducted in a water flume using Particle Image Velocimetry (PIV) to study the evolution of the vortical structures in the wakes of four types of screen cylinders at a Reynolds number of about 3200. The results were compared with that of a bare cylinder. The screen cylinders were made of stainless steel screen meshes of various porosities (37%, 48%, 61% and 67%) rolled into cylindrical shapes. Smoke wire flow visualisations in a wind tunnel were also conducted in support of the PIV tests. Depending on the porosity of the screen mesh, two vortex formation mechanisms for the screen cylinder wakes were identified. One was associated with wake instability and the other was associated with shear-layer (Kelvin-Helmholtz) convective instability which involved merging through pairing and tripling of small-scale vortices within the shear layers. The former was responsible for the formation of large-scale vortices in the bare cylinder and the screen cylinder wakes with 37% and 48% porosities, while the latter was responsible for the screen cylinder wakes with 61% and 67% porosities. The results also showed that with increasing porosity, the vortex formation region was extended farther downstream and the Reynolds shear stress, the Turbulent Kinetic Energy (TKE) and vortex intensity were decreased constantly.     

基于LBM方法的风力发电机尾流结构仿真

针对传统CFD数值计算方法难以实现风力机动态旋转及其旋转状态下的流固耦合计算,本文结合格子玻尔兹曼(LBM)方法易于处理动态复杂边界的特点及大涡模拟(LES)方法在非稳态涡流结构捕捉上的优势,采用LBM-LES联合方法进行三维风力发电机整机气动性能及尾流结构仿真研究,同时采用尺度自适应方法对尾涡结构进行跟踪和精细化计算。针对NREL PhaseⅥ型试验机进行模拟,得到了与实验结果吻合的流动形态及尾流结构演变规律,分析了尾流区速度演变规律并对比了不同亚格子湍流模型对计算结果的影响.     

Generalization of the Kelvin equation for arbitrarily curved surfaces

Capillary condensation, which takes place in confined geometries, is the first-order vapor-to-liquid phase transition and is explained by the Kelvin equation, but the equation's applicability for arbitrarily curved surface has been long debated and is severe problem. Recently, we have proposed generic dynamic equations for moving surfaces. Application of the equations to the vapor/fluid interfaces in chemical equilibrium conditions nearly trivially solves the generalization problem for the Kelvin equation. The equations are universally true for any surfaces: atomic, molecular, micro or macro scale, real or virtual, Riemannian or pseudo-Riemannian, active or passive.     

三维格子Boltzmann方法研究上升双气泡的运动特性

应用格子Boltzmann三维模型，对双气泡在静水中的运动进行数值研究.采用八点差分和十八点差分格式分别求解一阶▽φ和二阶▽²φ可以有效避免气液密度比过大造成的数值不稳定问题.结果表明：当两个相同直径的气泡在上升时，位置靠上的气泡形状变化像单气泡上升一样，而位置靠下的气泡会受到前一个气泡尾迹的影响，并有很明显的形状变化.当两个气泡直径不同时，不管初始位置如何，大气泡总会对小气泡造成强烈的影响.     

纳米多孔阳极氧化铁膜的形成及其形貌演变

阳极氧化法制备具有纳米多孔结构的阳极氧化铁膜因其潜在的应用价值而倍受关注。然而,在阳极氧化过程中多孔结构的形成机制至今尚不清楚。本文结合电流密度-电位响应（I-V曲线）及法拉第定律的推导,分析了形成纳米多孔阳极氧化铁膜的过程中阳极电流的组成。结果表明,离子电流（导致离子迁移形成氧化物）和电子电流（导致析出氧气）共同组成阳极电流,并且纳米多孔阳极氧化铁膜的形成与两种电流的占比相关。分段式氧化物之间的空腔以及在阳极氧化初期纳米孔道上覆盖的致密膜,表明氧气泡可能是从氧化膜内部析出。此时,阳离子和阴离子绕过作为模具的氧气泡实现传质,最终导致纳米多孔结构的形成。此外,在阳极氧化铁膜形貌演变过程中,氧气泡不断向外溢出会使表面氧化物被冲破,导致表面孔径不断增大。     

Differentiating bulk nanobubbles from nanodroplets and nanoparticles

History has shown that it is not as easy as one might think to differentiate between bulk nanobubbles and nanodroplets or nanoparticles. It is generally easy to detect colloids (i.e. something that looks different, e.g. scatters light differently than its surrounding solvent), but less easy to determine the nature of these colloids. This has led to misinterpretations in the literature, where nanodroplets or nanoparticles have mistakenly been assumed to be nanobubbles. In this paper, we review a multitude of experimental methods and approaches to prove the existence of bulk nanobubbles. We conclude that combinations of optical detection with physical perturbations such as pressure or ultrasound, or phase-sensitive holographic methods are the most promising and convenient approaches.     

Fine structure of a stratified flow near a flat-plate surface

The pattern of disturbances arising during the motion of a strip along a horizontal surface in a continuously stratified fluid with identified upstream and attached internal waves, boundary layers, and edge singularities is calculated in the liner approximation. The flow pattern behind a flat plate moving with a constant velocity in a continuously stratified fluid is studied with the use of the optical schlieren technique; transformation of waves and finely structured elements of the flow with increasing plate velocity is analyzed. The calculated and experimentally observed patterns of internal waves at low velocities are demonstrated to be in good agreement. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 48, No. 6, pp. 77–91, November–December, 2007.     

圆柱绕流尾迹中相干结构对湍流特性的影响

实验研究了圆柱尾迹中相干结构对湍流平均量的影响.用一个X热线在距离圆柱体y/d=4测量参考信号,用X热线和冷线相结合的三线探头测量从x/d=10～40的圆柱绕流尾迹中的速度和温度脉动,用条件平均的方法研充圆柱绕流近尾迹中的相干结构,并对相干结构对动量和热量的湍流输运过程的影响进行初步分析.结果表明:相干结构对尾迹中速度的横向脉动影响最大;相干结构对湍流参数的影响随x/d的变化明显.该工作还对相干结构引起的湍动能产生率变成负和逆温度梯度输运现象做了定性的解释.     

求解脉动速度关联函数的新方法及其在平面湍尾流中的应用

将周培源给出的平面湍尾流的一级近似解作为已知量,代入湍流脉动速度方程中,在微尺度范围内,采用谱方法对该方程进行数值求解,得到了和实验结果符合的二阶、三阶、四阶脉动速度关联函数的计算结果。